글

KLINGELNBERG HNC35S

/in , /by

KLINGELNBERG HNC 35S


Specification

  • Grinding length : 660mm
  • Normal distance between centres (centres at the back) : 950mm
  • Max. distance between centres (centres inside clamping head) : 1,330mm
  • Height of Centers : 180mm
  • Workpiece , min./max. : 10~350mm
  • Workpiece speeds, infinitely variable : 0.3 ~ 52 rpm
  • Lead range, min./max. : 0,1 ~ 999mm
  • Max. lead angle : +/- 60°
  • Pressure angle : 5 ~ 90°
  • No. of starts : 1 ~ 99
  • Grinding depth : 100mm
  • Grinding wheel dimensions, x width : 500 x 63mm
  • Grinding wheel speeds, infinitely variable : 75 ~ 2,400 rpm
  • Grinding Spindle drive, approx. : 48 kW
  • Total electric load : 100 kW – 380 V – 50 Hz
  • Weight complete Unit : 12,500kg

KLINGELNBERG AMKU630

/in , /by

KLINGELNBERG AMKU630


Specification

Wheel diameter – max : 630 mm
Largest tooth width : 100 mm
Module : 2.4 to 13 mm
Number of teeth : 5-120
Hypoid offset : +/- 100 mm
Machine weight : Approximately 18,000 kg
Abmessungen (L x B x H) : 4750 x 2300 x 2600 mm

KLINGELNBERG AGW231

/in /by

KLINGELNBERG AGW231


Specification

  • Grinding length: 475 mm
  • Grinding wheel speeds: 1500-2.700 U/min
  • Number of clamping slots: 3-45
  • Grinding slide feeds: 0-12 m/min
  • Taper: ISO 40
  • Grinding wheel diameter:
    -Used wheel: 180 mm
    -Unused wheel: 250 mm
  • Max. grinding diameter:
    -Spiral flute: 230 mm
    -Straight flute: 250 mm
  • Total power requirement: 6,4 kW
  • Machine dimensions: 2060x1150x1700 mm
  • Machine weight: 3,6 tons