글

Gleason #17 – Hypoid Gear Tester

/in , /by

Gleason #17 – Hypoid Gear Tester


Specification

  • MAXIMUM DIAMETER OF GEAR 18″
  • MAXIMUM OFFSET C/L OF GEAR SPINDLE ABOVE OR BELOW C/L OF PINION SPINDLE 3.5″
  • DISTANCE FROM CENTER OF GEAR SPINDLE TO NOSE OF PINION SPINDLE, MAX. 12″, MIN. 5.75″
  • DISTANCE FROM CENTER OF PINION SPINDLE TO NOSE OF GEAR SPINDLE, MAX. 6.375″, MIN. 3.50″
  • BRAKE (GEAR) SPINDLE (#14 TAPER):
    DIAMETER OF TAPER HOLE AT LARGE END 2-19/64″
    TAPER PER FOOT 1/2″
  • DRIVE (PINION) SPINDLE (#39 TAPER):
    DIAMETER OF TAPER HOLE AT LARGE END 3-39/32″
    TAPER PER FOOT 39/64″
  • DRIVE SPINDLE SPEED 1200 RPM
  • FLOOR SPACE (APPROX.) 73″L X 60″W X 66″H
  • WEIGHT APPROX. 5,800 LBS.

HOEFLER EMZ 2602

/in , /by

HOEFLER EMZ 2602


Specification

  • Diameter of Workpiece 5-2600mm
  • Diameter Int. Gears 20
  • Module Range 1-32
  • Max Helix Angle 90 deg
  • Number of Axis 4
  • Travel Distance
    X Axis 320mm
    A Axis 1350mm
    Z Axis 1000mm
    V Axis 75mm
  • Distance between centers 1850mm
  • Tableload Max daN-10000 22000 lbs